50mm brackets arcs

From OLEG

Program: 50mm brackets+arcs

Program Origin: (85.432, 249.372, 85.65)

Line Parameters

• Down Speed = 20 (mm/s)
• Dispense Gap = 1 (mm)
• Pre-move Delay = 0.1 (s)
• Line Speed = 0.7 (mm/s)
• Shutoff Distance = 0.5 (mm)
• Dwell Time = 0.05 (s)
• Reverse Time = 0 (s)
• Backtrack Gap = 10 (mm)
• Backtrack Length = 0 (mm)
• Backtrack Speed = 10 (mm/s)
• Retract Speed = 15 (mm/s)
• Retract Distance = 30 (mm)

Program Instructions

1. CP Start (90, -5, 85.65)
2. CP End (88, -5, 85.65)
3. CP Start (48, -16, 85.8)
4. CP Mid (48, -1, 85.8)
5. CP Mid (3, -1, 85.8)
6. CP Mid (3, -16, 85.8)
7. CP Mid (5, -16, 85.8)
8. CP Arc (25.5, -2, 85.8)
9. CP Mid (46, -16, 85.8)
10. CP End (48, -16, 85.8)
11. CP Start (48, -34, 85.8)
12. CP Mid (48, -49, 85.8)
13. CP Mid (3, -49, 85.8)
14. CP Mid (3, -34, 85.8)
15. CP Mid (5, -34, 85.8)
16. CP Arc (25.5, -48, 85.8)
17. CP Mid (46, -34, 85.8)
18. CP End (48, -34, 85.8)