60mm arcs

From OLEG

Program: 60mm arcs

Program Origin: (85.432, 249.162, 84.42)

Line Parameters

• Down Speed = 20 (mm/s)
• Dispense Gap = 1 (mm)
• Pre-move Delay = 0.1 (s)
• Line Speed = 0.7 (mm/s)
• Shutoff Distance = 0.5 (mm)
• Dwell Time = 0.05 (s)
• Reverse Time = 0 (s)
• Backtrack Gap = 10 (mm)
• Backtrack Length = 0 (mm)
• Backtrack Speed = 10 (mm/s)
• Retract Speed = 15 (mm/s)
• Retract Distance = 30 (mm)

Program Instructions

1. CP Start (90, -5, 85.65)
2. CP End (88, -5, 85.65)
3. CP Start (0.5, -24, 84.42)
4. CP Mid (0.5, -18, 84.42)
5. CP Arc (27, -1, 84.42)
6. CP Mid (53.5, -18, 84.42)
7. CP End (53.5, -24, 84.42)
8. CP Start (53.5, -35, 84.42)
9. CP Mid (53.5, -41, 84.42)
10. CP Arc (27, -58, 84.42)
11. CP Mid (0.5, -41, 84.42)
12. CP End (0.5, -35, 84.42)