New Technique Uses Power Anomalies to ID Malware in Embedded Systems
A new technique uses power fluctuations to detect malware that uses a system’s architecture to thwart traditional security measures.
Researchers from North Carolina State University and the University of Texas at Austin have developed a technique for detecting types of malware that use a system’s architecture to thwart traditional security measures. The new detection approach works by tracking power fluctuations in embedded systems.
“Embedded systems are basically any computer that doesn’t have a physical keyboard – from smartphones to Internet of Things devices,” says Aydin Aysu, co-author of a paper on the work and an assistant professor of electrical and computer engineering at NC State. “Embedded systems are used in everything from the voice-activated virtual assistants in our homes to industrial control systems like those used in power plants. And malware that targets those systems can be used to seize control of these systems or to steal information.”
At issue are so-called micro-architectural attacks. This form of malware makes use of a system’s architectural design, effectively hijacking the hardware in a way that gives outside users control of the system and access to its data. Spectre and Meltdown are high-profile examples of micro-architectural malware.
“The nature of micro-architectural attacks makes them very difficult to detect – but we have found a way to detect them,” Aysu says. “We have a good idea of what power consumption looks like when embedded systems are operating normally. By looking for anomalies in power consumption, we can tell that there is malware in a system – even if we can’t identify the malware directly.”
The power-monitoring solution can be incorporated into smart batteries for use with new embedded systems technologies. New “plug and play” hardware would be needed to apply the detection tool with existing embedded systems.
There is one other limitation: the new detection technique relies on an embedded system’s power reporting. In lab testing, researchers found that – in some instances – the power monitoring detection tool could be fooled if the malware modifies its activity to mimic “normal” power usage patterns.
“However, even in these instances our technique provides an advantage,” Aysu says. “We found that the effort required to mimic normal power consumption and evade detection forced malware to slow down its data transfer rate by between 86 and 97 percent. In short, our approach can still reduce the effects of malware, even in those few instances where the malware is not detected.
“This paper demonstrates a proof of concept. We think it offers an exciting new approach for addressing a widespread security challenge.”
The paper, “Using Power-Anomalies to Detect Evasive Micro-Architectural Attacks in Embedded Systems,” will be presented at the IEEE International Symposium on Hardware Oriented Security and Trust (HOST), being held May 6-10 in Tysons Corner, Va. First author of the paper is Shijia Wei, a Ph.D. student at UT-Austin. The paper was co-authored by Michael Orshansky, Andreas Gerstlauer and Mohit Tiwari of UT-Austin.
The work was done with support from Lockheed Martin, and from the National Science Foundation, under grants 1850373 and 1527888.
Note to Editors: The study abstract follows.
“Using Power-Anomalies to Detect Evasive Micro-Architectural Attacks in Embedded Systems”
Authors: Shijia Wei, Michael Orshansky, Andreas Gerstlauer, and Mohit Tiwari, University of Texas at Austin; Aydin Aysu, North Carolina State University
Presented: May 6-10, IEEE International Symposium on Hardware Oriented Security and Trust, Tysons Corner, Va.
Abstract: High-assurance embedded systems are deployed for decades and expensive to re-certify – hence, each new attack is an unpatchable problem that can only be detected by monitoring out-of-band channels such as the system’s power trace or electromagnetic emissions. Micro-Architectural attacks, for example, have recently come to prominence since they break all existing software-isolation based security – for example, by hammering memory rows to gain root privileges or by abusing speculative execution and shared hardware to leak secret data. This work is the first to use anomalies in an embedded system’s power trace to detect evasive micro-architectural attacks. To this end, we introduce power-mimicking micro-architectural attacks – including DRAM-rowhammer attacks, side/covert-channel and speculation driven attacks – to study their evasiveness. We then quantify the operating range of the power-anomalies detector using the Odroid XU3 board – showing that rowhammer attacks cannot evade detection while covert channel and speculation-driven attacks can evade detection but are forced to operate at a 36× and 7× lower bandwidth. Our power-anomaly detector is efficient and can be embedded out-of-band into (e.g.) programmable batteries. While rowhammer and side-channel defenses require invasive code- and hardware-changes in general-purpose systems, we show that power-anomalies are a simple and effective defense for embedded systems. Power-anomalies can help future-proof embedded systems against vulnerabilities that are likely to emerge as new hardware like phase-change memories and accelerators become mainstream.
This post was originally published in NC State News.
This post was originally published in NC State News.